Installed by CleanCut Bath Employee Installers. Product + labor covered by one warranty.

Call 888-388-9890

Will a CleanCut Tub Conversion Leak?

No. When it’s installed correctly, CleanCut creates a permanent, watertight seal with your existing tub. Here’s how the seal works, how much water each model can hold, and what’s covered if you ever have a problem.

How the insert seals

After a section of the tub wall is removed, your installer covers the cut edges with a waterproof wrap for an added layer of protection. The CleanCut insert is then custom fitted over the opening and bonded to your tub with industrial-grade adhesive, applied in clean, even lines. A support structure underneath carries your weight when you step through. Once the adhesive has fully set, the insert and tub act as one solid, sealed surface. That’s why we ask you to wait 48 hours after installation before using your tub.

How much water can each model hold?

The CleanCut

Step, Deep Step & Ultra-Low

Built for showering. The seal keeps water inside the tub, but the tub shouldn’t be filled above the bottom of the opening.

The CleanCut

Convertible

Built for both. Lock the watertight insert into the opening and fill the tub for a full bath, or remove it to shower.

What if I have a problem?

Installations completed by CleanCut Bath are covered by a 5-year warranty on both product and labor, so if your seal ever fails, we’ll make it right. If you ever have a problem, call us at (888) 388-9890. Every install is completed by a CleanCut Bath employee who is licensed, background-checked and insured.

Keeping it watertight

  • Wait 48 hours after installation before your first shower or bath.
  • Clean with a gentle household cleaner, and avoid harsh cleansers or abrasive tools.
  • With the Convertible, make sure both knobs are tightened before filling the tub.

Get a CleanCut installed in your home.

Will Water Get on My Bathroom Floor?

Not when your shower is set up the right way. The opening sits above the floor of your tub, so shower water drains normally, and the seal around the insert keeps water inside the tub. A few simple habits keep splashes off your floor.

Does water splash through the opening?

Like any shower without a door, water can splash out if the spray hits the opening directly or the curtain isn’t in place. That’s easy to prevent, and it isn’t a sign of a leak.

How should I position my shower curtain?

Do

  • Hang the liner inside the tub
  • Make sure it reaches below the opening
  • Close it fully across the length of the tub

Avoid

  • Letting the liner hang outside the tub
  • A liner that’s too short to cover the opening
  • Aiming the shower spray at the opening

What if water still gets out under the curtain?

  • Try a weighted liner. A liner with a weighted hem stays in place instead of drifting toward the opening.
  • Adjust your showerhead. Angle the spray toward the back wall, away from the opening.
  • Keep your drain clear. A slow drain lets water rise in the tub, closer to the opening.
  • Use a bath mat. A non-slip, absorbent mat outside the tub catches drips as you step out.

If water seems to be coming from around the insert itself rather than from splashing, call us at (888) 388-9890. Installations completed by CleanCut Bath are covered by a 5-year warranty on product and labor.

Get a CleanCut installed in your home.

Will CleanCut Work on My Tub?

Most likely. CleanCut fits most standard bathtubs, and there are models built for tubs that aren’t standard, including curved, garden and taller tubs, as well as one-piece tub and shower units. Here’s how to tell which one fits yours.

Does it work with my tub’s material?

Yes. CleanCut can be installed on fiberglass, acrylic, steel and cast-iron tubs, including porcelain-enameled tubs.

Which model fits my tub’s shape?

Your tubBest fit
Standard tubCleanCut Step, or the Convertible if you still want to take baths
Curved or garden tubCleanCut Deep Step, an extra-wide size made for unique tubs
Taller, high-profile tubCleanCut Ultra-Low
One-piece tub and shower unitCleanCut works on these too; your installer will confirm the best model for your unit

Is CleanCut one size fits all?

No, and that’s what lets it fit so many tubs. The Step and Deep Step come in multiple sizes based on the thickness of your tub’s rim, the part you step over. Three measurements decide the right fit: the tub’s shortest depth, its widest top rail and its widest bottom rail.

Not sure what you have?

You don’t need to figure it out yourself. With professional installation, your installer measures your tub and reviews all of your options with you before beginning the install. If you’re installing it yourself, the product selection tool on our DIY kits page walks you through each measurement.

Thinking about installing it yourself? Read Can I Install CleanCut Myself?

Get a CleanCut installed in your home.

Which CleanCut Is Right for Me?

Choosing a CleanCut comes down to one simple question.

Do you want to keep using your tub for baths?

The CleanCut

Convertible

Yes, I want to take baths.

The only CleanCut that keeps your tub working as a full bathtub. Use it as a step-in shower every day, then lock in the insert whenever you want a bath.

  • Insert weighs just 2.5 pounds
  • Locks in place with two fast-thread knobs
  • Fill the tub normally with the insert in place

$1,895

The CleanCut

Step line

No, I only shower.

The best route for easy, everyday shower access. Step through the opening without ever climbing over the side of your tub.

The Step line includes the Step, Deep Step and Ultra-Low.

$1,595

All prices include product, professional installation and any applicable taxes.

What about sizing?

That’s handled for you. Your installer measures your tub and reviews all of your options with you before beginning the install. Every installer is a CleanCut Bath employee who is licensed, background-checked and insured.

Backed by a 5-year warranty

Whichever you choose, every installation completed by CleanCut Bath is covered by a 5-year warranty on both product and labor.

Get a CleanCut installed in your home.

What to Expect on Install Day

Your CleanCut installation is usually finished in just a few hours, in a single visit. Here’s how the day goes, from the moment your installer arrives to your first shower.

  1. Before we arrive: Clear the tub and the area around it, including shampoo bottles, bath mats and the shower curtain, so your installer can get right to work. There’s no need to shut off your water, since CleanCut doesn’t change your plumbing.
  2. Meet your installer: Your installer will arrive within a 2-hour arrival window and will contact you at least 30 minutes before arriving. Every installer is a CleanCut Bath employee who is licensed, background-checked and insured, and wears a CleanCut badge so they’re easy to identify.
  3. Measuring and reviewing options: Your installer measures your tub and reviews all of your options with you before beginning the install, so you know exactly what you’re getting.
  4. The installation: Before any work begins, your installer puts down plastic to protect every area of your bathroom. Then they cut a section from the side of your tub and fit and seal the CleanCut insert so it’s watertight.
  5. Cleanup and final walkthrough: When the installation is done, your installer removes the plastic and cleans up your bathroom. Then they show you the finished tub and, with the Convertible, how to use the insert. We don’t take any payment from you until you’re fully satisfied.
  6. Wait 48 hours: Give your tub 48 hours before your first shower or bath. After that, it’s ready for everyday use.

Covered after we leave

Your installation is backed by a 5-year warranty on both product and labor. If you ever have a problem, call us at (888) 388-9890.

Get a CleanCut installed in your home.

How Much Does a Tub-to-Shower Conversion Cost?

A traditional tub-to-shower conversion means tearing out your bathtub and rebuilding the space, which can run into the thousands and take days or weeks. CleanCut works with the tub you already have: we remove a section of the tub wall and fit a custom insert, so you get step-in access for a fraction of the cost, usually in a single visit.

Professional installation pricing

The CleanCut

Step, Deep Step & Ultra-Low

$1,595

Turns your tub into a step-in shower, with no more climbing over the side.

The CleanCut

Convertible

$1,895

Step-in shower or full bath. A watertight insert locks in when you want to fill the tub.

What’s included in the price?

Your price covers everything: the CleanCut product, labor and any applicable taxes. There are no surprise fees added at the end.

  • Installed by our own team. Every installation is completed by a CleanCut Bath employee who is licensed, background-checked and insured.
  • Sizing handled for you. Your installer measures your tub and reviews all options with you before beginning the install.
  • Done in a single visit. Most installations take just a few hours, with little mess or disruption to your home.
  • Backed by a 5-year warranty. Installations completed by CleanCut Bath are covered for 5 years on both product and labor.
  • Satisfaction guaranteed. Backed by more than 1,000 five-star reviews, we don’t take any payment from you until you’re fully satisfied.

Are there DIY options?

Yes. You can buy a CleanCut kit directly from us and install it yourself. Each kit includes the insert, support structure, cutting template and adhesive. DIY installation involves cutting your tub with a grinder, so it’s best for people comfortable with power tools. See current kit prices and find the right fit for your tub on our DIY kits page.

Not sure whether DIY is right for you? Read Can I Install CleanCut Myself?

Get a CleanCut installed in your home.

Does Cutting Your Bathtub Hurt Resale Value?

It’s a fair question to ask before cutting into your tub. CleanCut is designed to make your tub easier to use without taking anything important away from your home. Here’s what to consider if you think you might sell someday.

Your bathroom still has a tub

Many buyers, especially families with young children, look for at least one bathtub in a home. A full remodel that replaces your tub with a shower takes that away. CleanCut doesn’t. Your tub stays in place, and with the CleanCut Convertible, it still works as a full bathtub: lock the watertight insert into the opening and fill it up.

It looks like it belongs

CleanCut isn’t a makeshift fix. Each insert is custom fitted to your tub, comes in white or beige to match most tubs, and is installed by a CleanCut Bath employee who is licensed, background-checked and insured. The result is a clean, finished opening that looks like part of the tub.

Easier access can be a selling point

A growing number of buyers are looking for homes they can stay in as they age, or that work for an older parent moving in. For those buyers, a tub they can step into safely is a feature, not a drawback.

Choosing with resale in mind

If you…Consider
Plan to stay in your homeCleanCut Step, Deep Step or Ultra-Low for the easiest everyday access
Might sell in the next few yearsCleanCut Convertible, so future buyers keep a full bathtub

Either way, CleanCut costs a fraction of a remodel, so you’re not putting thousands of dollars into a bathroom you may leave.

Get a CleanCut installed in your home.

CleanCut vs. a Full Bathroom Remodel

If stepping over the side of your tub has become difficult, you have two main options: remodel the bathroom to replace the tub with a shower, or keep your tub and add a CleanCut step-in opening. Here’s how they compare.

CleanCutFull remodel
Cost$1,595 to $1,895, including product, labor and taxesOften several thousand dollars, and more with new tile, glass or plumbing work
TimeA few hours, in a single visitTypically days to weeks
Your tubStays in place; a section of the wall is removed and fitted with an insertTorn out and replaced
DisruptionLittle mess, and no changes to your walls or plumbingDemolition, dust and a bathroom out of use during the project
Taking a bathStill possible with the CleanCut ConvertibleGone if the tub is replaced with a shower
Who installsA CleanCut Bath employee who is licensed, background-checked and insuredVaries by contractor
Warranty5 years on product and laborVaries by contractor

When CleanCut is the better fit

CleanCut makes the most sense when your tub is in good shape and the real problem is getting in and out of it. It lowers the height you step over, keeps your existing bathroom intact, and is installed in a single visit. It’s also the right choice when you need an immediate solution: there’s no waiting weeks for a remodel. Installation takes just a few hours, and your tub is ready to use 48 hours later.

When a full remodel makes sense

A remodel may be the right call if you want to change your bathroom’s layout or look, if your tub is damaged, or if you need a curbless, roll-in shower for a wheelchair. CleanCut lowers the step into your tub, but it doesn’t remove the step entirely.

Get a CleanCut installed in your home.

Can I Still Take a Bath After a Tub Conversion?

Yes, if you choose the CleanCut Convertible. It gives you a step-in shower when you want easy access and a full bathtub when you want to soak, all in the tub you already have.

One tub, two ways to use it

Shower mode

Leave the insert out and step through the opening, with no need to climb over the side of the tub.

Bath mode

Lock the watertight insert into the opening, and fill your tub just as you normally would.

Switching between a bath and a shower

The insert weighs just 2.5 pounds and was designed with seniors in mind, so it’s easy to lift and handle.

To take a bath:

  1. Place the insert into the opening.
  2. Tighten the two fast-thread knobs to lock it in place.
  3. Fill the tub normally and enjoy your bath.

To go back to showering: drain the tub, loosen the two knobs and remove the insert. It stores easily in a vanity, under a bed or in a closet until you need it again.

What about the Step line?

The Step, Deep Step and Ultra-Low are built for showering, so the tub shouldn’t be filled above the bottom of the opening. If taking a bath matters to you or anyone in your home, the Convertible is the right choice.

How much does the Convertible cost?

Professional installation of the CleanCut Convertible is $1,895, including product, labor and any applicable taxes. It’s completed by a CleanCut Bath employee who is licensed, background-checked and insured, and it’s backed by a 5-year warranty on product and labor.

Get a CleanCut installed in your home.

Can I Install CleanCut Myself?

Yes. CleanCut is available as a DIY kit for experienced do-it-yourselfers. For most homeowners, though, professional installation is the easier and safer choice. Here’s what each involves.

Is CleanCut a kit?

It can be. Each DIY kit includes the insert, support structure, cutting template and adhesive. You can see current prices, and use our product selection tool to find the right size for your tub, on our DIY kits page.

How difficult is it?

Installing CleanCut means cutting through the wall of your tub with an angle grinder, then fitting and sealing the insert so it stays watertight. It’s best suited to people who are experienced and comfortable with power tools. Once installed, the tub needs 48 hours before it can be used.

DIY or professional?

DIY kitProfessional installation
SizingYou measure your tub using our selection toolYour installer measures and reviews all options with you
Who does the workYou do the cutting, fitting and sealingA CleanCut Bath employee who is licensed, background-checked and insured
TimeDepends on your experienceUsually just a few hours, in a single visit
PriceSee our DIY kits page$1,595 for the Step line, $1,895 for the Convertible, including product, labor and taxes
WarrantyLimited warranty on the product only5 years on product and labor
PaymentPaid when you orderNo payment until you’re fully satisfied

Is an installer available in my area?

Call us at (888) 388-9890 to find out whether CleanCut Bath installs in your area and to schedule your installation.

Get a CleanCut installed in your home.